[1] Li, X., Xu, B., Tian, H., & Shu, G. (2021). Towards a novel holistic design of organic Rankine cycle (ORC) systems operating under heat source fluctuations and intermittency. Renewable and Sustainable Energy Reviews, 147, 111207.

[2] White, M. T., Bianchi, G., Chai, L., Tassou, S. A., & Sayma, A. I. (2021). Review of supercritical CO2 technologies and systems for power generation. Applied Thermal Engineering, 185, 116447.

[3] Bahoosh, R., Sedeh Ghahfarokhi, M., & Saffarian, M. (2018). Energy and exergy analysis of a diesel engine running with biodiesel fuel. Journal of Heat and Mass Transfer Research, 5(2), 95-104.

[4] Tang, J., Zhang, Q., Zhang, Z., Li, Q., Wu, C., & Wang, X. (2022). Development and performance assessment of a novel combined power system integrating a supercritical carbon dioxide Brayton cycle with an absorption heat transformer. Energy Conversion and Management, 251, 114992.

[5] Wang, S., Zhang, L., Liu, C., Liu, Z., Lan, S., Li, Q., & Wang, X. (2021). Techno-economic-environmental evaluation of a combined cooling heating and power system for gas turbine waste heat recovery. Energy, 231, 120956.

[6] Abdoos, B., Pourfayaz, F., Nouralishahi, A., & Zendehnam, A. (2024). Conceptual design and 4E analyses of a tetrageneration system in two different configurations based on poplar sawdust as a local woody biomass fuel. Biofuels, Bioproducts and Biorefining, 18(5), 1152-1174.

[7] Jagtap, H. P., Bewoor, A. K., & Kumar, R. (2020). Failure analysis of induced draft fan used in a thermal power plant using coordinated condition monitoring approach: A case study. Engineering Failure Analysis, 111, 104442.

[8] Yan, R., Wang, J., Wang, J., Tian, L., Tang, S., Wang, Y., ... & Li, Y. (2022). A two-stage stochastic-robust optimization for a hybrid renewable energy CCHP system considering multiple scenario-interval uncertainties. Energy, 247, 123498.

[9] Jagtap, H., Bewoor, A., Kumar, R., Ahmadi, M. H., & Lorenzini, G. (2020). Markov-based performance evaluation and availability optimization of the boiler–furnace system in coal-fired thermal power plant using PSO. Energy Reports, 6, 1124-1134.

[10] Li, Y., Zhang, J., Wu, X., Shen, J., & Maréchal, F. (2023). Stochastic-robust planning optimization method based on tracking-economy extreme scenario tradeoff for CCHP multi-energy system. Energy, 283, 129025.

[11] Jagtap, H. P., Bewoor, A. K., Kumar, R., Ahmadi, M. H., & Chen, L. (2020). Performance analysis and availability optimization to improve maintenance schedule for the turbo-generator subsystem of a thermal power plant using particle swarm optimization. Reliability Engineering & System Safety, 204, 107130.

[12] Dai, Y., & Zeng, Y. (2022). Optimization of CCHP integrated with multiple load, replenished energy, and hybrid storage in different operation modes. Energy, 260, 125129.

[13] Jagtap, H. P., Bewoor, A. K., Kumar, R., Ahmadi, M. H., Assad, M. E. H., & Sharifpur, M. (2021). RAM analysis and availability optimization of thermal power plant water circulation system using PSO. Energy reports, 7, 1133-1153.

[14] Zhang, D., Yang, X., Li, H., Jia, Z., Zhang, S., Tang, S., ... & Wu, X. (2024). 4E analysis and parameter study of a solar-thermochemical energy storage CCHP system. Energy Conversion and Management, 301, 118002.

[15] Gadhave, P. S., Prabhune, C. L., Jagtap, H. P., & Ritapure, P. P. (2022). Investigative study of solidification and melting of stearic acid in triplex pipe with perforated fin surface. J. Adv. Res. Fluid Mech. Therm. Sci., 98, 125-136.

[16] Ye, J., Dong, Q., Yang, G., Qiu, Y., Zhu, P., Wang, Y., & Sun, L. (2024). Multi-objective optimal configuration of CCHP system containing hybrid electric-hydrogen energy storage system. Energy Informatics, 7(1), 1-20.

 [17] Jagtap, H. P., Bewoor, A., & Kumar, R. (2019). Thermal power plant condenser fault diagnosis using coordinated condition monitoring approach. J Homepage, 18, 223-235.

[18] Dezhdar, A., Assareh, E., Agarwal, N., Baheri, A., Ahmadinejad, M., Zadsar, N., ... & Lee, M. (2024). Modeling, optimization, and economic analysis of a comprehensive CCHP system with fuel cells, reverse osmosis, batteries, and hydrogen storage subsystems Powered by renewable energy sources. Renewable Energy, 220, 119695.

[19] Balaso, F. B., & Jagtap, H. P. (2024). Failure analysis steam turbine in sugar factory thermal power plant: a Review. In IOP Conference Series: Earth and Environmental Science (Vol. 1285, No. 1, p. 012005). IOP Publishing.

[20] Li, Y., Tian, R., & Wei, M. (2022). Operation strategy for interactive CCHP system based on energy complementary characteristics of diverse operation strategies. Applied Energy, 310, 118415.

[21] Jagtap, H. P., & Bewoor, A. K. (2019). Markov probabilistic approach-based availability simulation modeling and performance evaluation of coal supply system of thermal power plant. In Reliability, Safety and Hazard Assessment for Risk-Based Technologies: Proceedings of ICRESH 2019 (pp. 813-824). Singapore: Springer Singapore.

[22] Fu, Z., Feng, L., Han, Y., & Sui, J. (2024). An universal energy-matching design and regulation method for combined cooling, heating, and power (CCHP) systems in different scenarios. Energy, 312, 133459.

[23] Jagtap, H., Bewoor, A., Kumar, R., Ahmadi, M. H., & Rajak, D. K. (2020). Reliability analysis using condition monitoring approach in thermal power plants. In Reliability Management and Engineering (pp. 113-132). CRC Press.

[24] Azhar, M. U., Anwar, M., Khan, U. M., Hassan, M., Ali, S. M., Waqas, A., ... & Alresheedi, F. (2023). Thermodynamic analysis of different modes of a multigeneration SOFC-CCHP system with freshwater production and LNG cold energy utilization. Energy Conversion and Management, 297, 117730.

[25] Kumar, R., Jagtap, H. P., Rajak, D. K., & Bewoor, A. K. (2020). Traditional and non-traditional optimization techniques to enhance reliability in process industries. In AI Techniques for Reliability Prediction for Electronic Components (pp. 67-80). IGI Global Scientific Publishing.

[26] Song, Z., Liu, T., & Lin, Q. (2020). Multi-objective optimization of a solar hybrid CCHP system based on different operation modes. Energy, 206, 118125.

[27] Jagtap, H. P., Bewoor, A. K., Pathan, F., & Kumar, R. (2020). Application of Particle Swarm Optimization Method to Availability Optimization of Thermal Power Plants. In Nature-Inspired Optimization in Advanced Manufacturing Processes and Systems (pp. 97-112). CRC Press.

[28] Zhang, F., Liao, G., Jiaqiang, E., Chen, J., & Leng, E. (2021). Comparative study on the thermodynamic and economic performance of novel absorption power cycles driven by the waste heat from a supercritical CO2 cycle. Energy Conversion and Management, 228, 113671.

[29] Ma, Z., Dong, F., Wang, J., Zhou, Y., & Feng, Y. (2023). Optimal design of a novel hybrid renewable energy CCHP system considering long and short-term benefits. Renewable Energy, 206, 72-85.

[30] Yuan, J., Wu, C., Xu, X., & Liu, C. (2021). Proposal and thermoeconomic analysis of a novel combined cooling and power system using carbon dioxide as the working fluid. Energy conversion and management, 227, 113566.

[31] Yao, E., Zhong, L., Li, R., Zhao, C., Wang, H., & Xi, G. (2023). 4E analysis and optimization of a novel combined cooling, heating and power system integrating compressed air and chemical energy storage with internal combustion engine. Journal of Energy Storage, 62, 106777.

[32] Liu, X., & Hayati, H. (2022). CCHP optimization for a building through optimal size of the prime mover considering energy, exergy, economics, and environmental aspects. Case Studies in Thermal Engineering, 39, 102403.

[33] Norani, M., & Deymi-Dashtebayaz, M. (2022). Energy, exergy and exergoeconomic optimization of a proposed CCHP configuration under two different operating scenarios in a data center: Case study. Journal of Cleaner Production, 342, 130971.

[34] Ghorbani, B., Ebrahimi, A., & Ziabasharhagh, M. (2021). Thermodynamic and economic evaluation of biomethane and carbon dioxide liquefaction process in a hybridized system of biogas upgrading process and mixed fluid cascade liquefaction cycle. Process Safety and Environmental Protection, 151, 222-243.

[35] Hai, T., Alsubai, S., Yahya, R. O., Gemeay, E., Sharma, K., Alqahtani, A., & Alanazi, A. (2023). Multiobjective optimization of a cogeneration system based on gas turbine, organic rankine cycle and double-effect absorbtion chiller. Chemosphere, 338, 139371.

[36] Ebrahimi, A., Ghorbani, B., & Ziabasharhagh, M. (2022). Exergy and economic analyses of an innovative integrated system for cogeneration of treated biogas and liquid carbon dioxide using absorption–compression refrigeration system and ORC/Kalina power cycles through geothermal energy. Process Safety and Environmental Protection, 158, 257-281.

[37] Huang, Z., You, H., Chen, D., Hu, B., Liu, C., Xiao, Y., ... & Lysyakov, A. (2024). Thermodynamic, economic, and environmental analyses and multi-objective optimization of a CCHP system based on solid oxide fuel cell and gas turbine hybrid power cycle. Fuel, 368, 131649.

[38] Liu, Y., Han, J., & You, H. (2023). Exergoeconomic analysis and multi-objective optimization of a CCHP system based on SOFC/GT and transcritical CO2 power/refrigeration cycles. Applied Thermal Engineering, 230, 120686.

[39] Liu, X., & Hayati, H. (2022). CCHP optimization for a building through optimal size of the prime mover considering energy, exergy, economics, and environmental aspects. Case Studies in Thermal Engineering, 39, 102403.

[40] Lucarelli, G., Genovese, M., Florio, G., & Fragiacomo, P. (2023). 3E (energy, economic, environmental) multi-objective optimization of CCHP industrial plant: Investigation of the optimal technology and the optimal operating strategy. Energy, 278, 127837.

[41] Khanmohammadi, S., & Musharavati, F. (2021). Multi-generation energy system based on geothermal source to produce power, cooling, heating, and fresh water: exergoeconomic analysis and optimum selection by LINMAP method. Applied Thermal Engineering, 195, 117127.

[42] Safavi, S. R., Copeland, C., Niet, T., & McTaggart-Cowan, G. (2023). Combined cooling, heat and power for commercial buildings: Optimization for hydrogen-methane blend fuels. Applied Thermal Engineering, 231, 120982.

[43] Yu, W., Xu, Y., Wang, H., Ge, Z., Wang, J., Zhu, D., & Xia, Y. (2020). Thermodynamic and thermoeconomic performance analyses and optimization of a novel power and cooling cogeneration system fueled by low-grade waste heat. Applied Thermal Engineering, 179, 115667.

[44] Chen, S., Arabkoohsar, A., Yang, Y., Zhu, T., & Nielsen, M. P. (2021). Multi-objective optimization of a combined cooling, heating, and power system with subcooled compressed air energy storage considering off-design characteristics. Applied Thermal Engineering, 187, 116562.

[45] Roushenas, R., Razmi, A. R., Soltani, M., Torabi, M., Dusseault, M. B., & Nathwani, J. (2020). Thermo-environmental analysis of a novel cogeneration system based on solid oxide fuel cell (SOFC) and compressed air energy storage (CAES) coupled with turbocharger. Applied Thermal Engineering, 181, 115978.

[46] Sadreddini, A., Fani, M., Aghdam, M. A., & Mohammadi, A. (2018). Exergy analysis and optimization of a CCHP system composed of compressed air energy storage system and ORC cycle. Energy conversion and management, 157, 111-122.

[47] Xu, X. X., Liu, C., Fu, X., Gao, H., & Li, Y. (2015). Energy and exergy analyses of a modified combined cooling, heating, and power system using supercritical CO2. Energy, 86, 414-422.

[48] Arora, A., & Kaushik, S. C. (2009). Theoretical analysis of LiBr/H2O absorption refrigeration systems. International Journal of Energy Research, 33(15), 1321-1340.

[49] Anand, D. K., & Kumar, B. (1987). Absorption machine irreversibility using new entropy calculations. Solar Energy, 39(3), 243-256.

[50] Wang, Z., Han, W., Zhang, N., Liu, M., & Jin, H. (2017). Proposal and assessment of a new CCHP system integrating gas turbine and heat-driven cooling/power cogeneration. Energy Conversion and Management, 144, 1-9.

[51] Kianfard, H., Khalilarya, S., & Jafarmadar, S. (2018). Exergy and exergoeconomic evaluation of hydrogen and distilled water production via combination of PEM electrolyzer, RO desalination unit and geothermal driven dual fluid ORC. Energy conversion and management, 177, 339-349.

[52] Taheri, M. H., Mosaffa, A. H., & Farshi, L. G. (2017). Energy, exergy and economic assessments of a novel integrated biomass based multigeneration energy system with hydrogen production and LNG regasification cycle. Energy, 125, 162-177.

[53] Mosaffa, A. H., Mokarram, N. H., & Farshi, L. G. (2017). Thermo-economic analysis of combined different ORCs geothermal power plants and LNG cold energy. Geothermics, 65, 113-125.

[54] Cavalcanti, E. J. C. (2017). Exergoeconomic and exergoenvironmental analyses of an integrated solar combined cycle system. Renewable and Sustainable Energy Reviews, 67, 507-519.