[1] Howland RCJ (1929) On the stresses in the neighborhood of circular hole in a strip under tension. Phil. Trans. Roj. Soc. 229: 49-86.

[2] Heywood RB (1952) Designing by photoelasticity. Chapman and Hall, London.

[3] Peterson RE (1974) Stress concentration factors. John Wiley & Sons, New York.

[4] Pilkey WD (1997) Peterson’s stress concentration factors. Second Edition, New York, NY: John Wiley & Sons Inc.

[5] Neuber H, Hahn HG (1966) Stress concentration in scientific research and engineering. Appl Mechanics Rev 19: 187–199.

[6] Sternberg E (1958) Three-dimensional stress concentration. Appl Mechanics Rev 11: 1–4.

[7] Muskhelishvili NI (1953) Some basic problems of mathematical theory of elasticity. P Noordhoff, Groningen, Holland.

[8] Savin GN (1961) Stress concentration around holes. Pergamon Press, New York.

[9] Eshelby JD, Read WT, Shockley W (1953) Anisotropic elasticity with applications to dislocation theory. Acta Metallurgica 1(3): 251–259.

[10] Stroh AN (1958) Dislocations and cracks in anisotropic elasticity. Philosophical Magazine 3(30): 625–646.

[11] Lekhnitskii SG (1963) Theory of elasticity of an anisotropic body. Mir Publishers, Moscow.

[12] Hedgepth JM )1961( Stress concentrations in a filamentary structures. NASA TND-882, May.

[13] Zender GW, Deaton JW (1963) Stress of filamentary sheets with one or more fiber broken. NASA TND-1609.

[14] Hedgepth J, Van Dyke P (1967) Local stress concentration in imperfect filamentary composite materials. Journal Composite Materials 1: 294–309.

[15] Hedgepth J, Van Dyke P (1969) Stress concentration from single filament failure in composite materials. Textile Research Journal 39: 618–626.

[16] Tan SC (1988) Finite-width correction factors for anisotropic plate containing a central opening. J Comp Mat: 22: 1088-1097.

[17] Daoust J, Hoa SV (1991) An analytical solution for anisotropic plates containing triangular holes. Composite Structure 19: 107–130.

[18] Gruber B, Hufenbach W, Kroll L, Lepper M, Zhou B (2007) Stress concentration analysis of fibre-reinforced multilayered composites with pin-loaded holes. J Composites Science and Technology 67: 1439–1450.

[19] Hufenbach W, Gottwald R, Grüber B, Lepper M, Zhou B (2008) Stress concentration analysis of thick-walled laminate composites with a loaded circular cut-out by using a first order shear deformation theory. J Composites Science and Technology 68: 2238–2244.

[20] Rezaeepazhand J, Jafari M (2005) Stress analysis of perforated composite plates. Composite Structures 71: 463–468.

[21] Rezaeepazhand J, Jafari M (2006) Stress concentration in composite plates with special shaped cutout. 12^th European Conference on Composite Materials, 29^th August-1^st September.

[22] Rezaeepazhand J, Jafari M (2008) Stress analysis of composite plates with non circular cut out. Key Engineering Materials 385-387: 365–368.

[23] Rezaeepazhand J, Jafari M (2010) Stress concentration in metallic plates with special shaped cutout. International Journal of Mechanical Sciences 52: 96–102.

[24] Mohammadi M, Dryden JR, Jiang L (2011) Stress concentration around a hole in a radially inhomogeneous plate. Journal of Solids and Structures 48: 483–491.

[25] Darwish F, Gharaibeh M, Tashtoush G (2012) A modified equation for the stress concentration factor in countersunk holes. Journal of Mechanics A/Solids 36: 94–103.

[26] Lekhnitskii SG (1968) Anisotropic plates. Translated from the Second Russian Edition by Tsai SW, Cheron Gordon and Breach.

[27] Martin H Sadd (2009) Elasticity theory, applications and numeric. Second Edition, Elsevier Inc.

[28] Abuelfoutouh NM (1993) Preliminary design of unstiffend composite shells. Symposium of 7^th Technical Conference of ASC: 786–693.