[1] Greaves, Peter, Robert (2013) Fatigue analysis and testing of wind turbine blades, Durham thesis, Durham University.

[2] رضا نادری، عبدالغفور خادم الرسول (1390) مدلسازی خودکار رشد ترک در مود مرکب و رشد ترک خستگی بدون مش بندی مجدد، مجله عملی پژوهشی مکانیک سازه‌ها و شاره‌ها.

[3] امیر ملک زاده، خلیل فرهنگ دوست، سعید حدیدی مود (1392) بررسی اثر بارگذاری ضربه‌ای در فرایند رشد ترک در فولاد فورج (EA4T)، مجله عملی پژوهشی مکانیک سازه‌ها و شاره‌ها.

[4] Nijssen RPL (2007) Fatigue life prediction and strength degradation of wind turbine rotor blade. Sandia National Laboratory report: SAND2006-7810P

[5] Van Buren KL, Mollineaux MG, Hemez FM, Atamturktur S (2013) Simulating the dynamics of wind turbine blades: part II, model validation and uncertainty quantification. Wind Energy 16: 741-758.

[6] Fleming I, Luscher DJ (2013) A model for the structural dynamic response of the CX-100 wind turbine blade. Wind Energy 17(6): 877-900.

[7] Van Paepegam W, Degrieck J (2002) Effects of load sequence and block loading on the fatigue response of fiber-reinforced composites. Mech Adv Mater Struc 9(1): 19-35.

[8] Grujicic M (2010) Structural-response analysis, fatigue-life prediction and material selection for 1 MW horizontal-axis wind-turbine blades. J Mater Eng Perform 19(6): 790-801.

[9] Larwood S, Musial W (2000) Comprehensive testing of Nedwind 12-meter wind turbine blades at NREL. National renewable energy laboratory, Report : NREL/CP-500-27497

[10] Court RS, Ridley S, Jones H, Bonnet PA, Dutton AG (2009) Fatigue testing of wind turbine blades with computational verification. ICCM-17, Edinburg.

[11] IEC 61400-23 (2005) Wind Turbine generator system- Part23: Full-scale structural testing of rotor blades.

[12] Germanischer L (2010) Guideline for the certification of wind turbines. Hamburg, Germany

[13] Paquette J, Dam J, Hughes S, Johnson J (2008) Fatigue testing of 9 m carbon fiber wind turbine research blades. Sandia National Laboratories.

[14] Westphal T (2010) Developments in wind turbine blade fatigue testing. Sandia blade workshops.

[15] Lai FM, Yang SH, Wu JH, Hsueh CT, Yang CC, Wang BH, Lan CH (2011) Development of fatigue test system for small composite wind turbine blades. Procedia Engineering.

[16] Ljung L (1999) System Identification theory for the user. 2ed edn. Prentice Hall publication.

[17] Skogestad S (2005) Ian postlethwaite, multivariable feedback control analysis and design. John wiley and Sons.

[18] Niksefat N, Sepehri N (2000) Design and experimental evaluation of a robust force controller for an electro-hydraulic actuator via quantitative feedback theory. Control Eng Pract 8(12): 1335-1345.

[19] MATLAB and Robust Toolbox Release 2012b, MathWorks, Inc., Natick, Massachusetts, United States.

[20] Astrom KJ (1995) Bjorn wittenmark, adaptive control. 2ed edn. Pearson Education Inc.