[1] Ting CT, Kalosclimidt G, Syltebo BE (1975) Design and testing of new center inlet and S–duct for B–727 airplane with refanned JT8D engines. Report/Patent Number: AIAA PAPER: 75–59.

[2] Little BH, Trimboli WS (1982) An experimental investigation of S-duct diffusers for high-speed prop-fans. Report/Patent Number: AIAA 82–1123.

[3] McDill PL, Tolle LI (1983) Analytical design and experimental verification of S-duct diffusers for turboprop installations with an offset gearbox. Report/Patent Number: AIAA PAPER 83–1211.

[4] Vakili A, Wu JM, Liver P, Bhat MK (1983) Measurements of compressible secondary flow in a circular S-duct Report/Patent Number: AIAA PAPER 83–1739.

[5] Reichert BA, Wendt BJ (1993) An experimental investigation of S-duct flow controling arrays of low–profile vortex generators. Report/Patent Number: AIAA PAPER 93–18.

[‌6] Reichert BA, Wendt BJ (1994) Improving diffusing S-duct performance by secondary flow control. Report/Patent Number: AIAA PAPER 94–0365.

[7] Lee BJ, Kim C, Rho OH (2003) Aerodynamic optimization for the subsonic S-shaped diffuser using two-equation turbulence models. Report/Patent Number: AIAA PAPER 2003–3960.

[8] Weng PF, Guo RW (1994) On swirl control in an S-shaped air intake high angle of attack. Report/Patent Number: AIAA PAPER 94–366.

[9] Mayer DW, Anderson BH, Johnson TA (1998) 3D subsonic diffuser design and analysis. Report/Patent Number: AIAA PAPER 98–3418.

[10] Silva Lopes A, Piomelli U (2003) Large eddy simulation of the flow in an S-duct. Report/Patent Number: AIAA PAPER 2003–964.

[11] Pradeep AM, Sullerey RK (2004) Secondary flow control in a circular S-duct diffuser using vortex generator jets. Report/Patent Number: AIAA 2004–2615.

[12] Stanley R, Mohler Jr (2004) Wind-US flow calculations for the M2129 S-duct using structured and unstructured grids. Report/Patent Number: AIAA 2004–525.

[13] Jirasek A (2006) Design of vortex generator flow control in inlets. J Aircraft, 43(6).

[14] Kirk AM, Rediniotis OK, Cizmas PGA (2007) Numerical and experimental investigation of a serpentine inlet duct. Report/Patent Number: AIAA 2007–842.

[15] Abdellatif OE, Abd Rabbo M, Abd Elganny M, Shahin I (2008) Area ratio effect on the turbulent flow through a diffusing S-duct using large–eddy simulation. Report/Patent Number: AIAA 2008–5726.

[16] Zhang JM, Wang CF, Lum KY (2008) Multidisciplinary design of S-shaped intake. AIAA 2008–7060.

[17] Johnson BC, Webster RS, Sreenivas K (2010) A numerical investigation of S-duct flows with boundary layer ingestion Report/Patent Number: AIAA 2010–841.

[18] بیاتی مرتضی، فتحی مهدی ، بهمنی ناد علی ، غلامی علی (1386) طراحی و بهینه‌سازی آیرودینامیکی ورودی هوای موتور یک پهپاد جت.

[19] بهفرشاد قاسم، فرقانی فرزاد (1388) بررسی عددی فشار کل در یک مجرای ورودی هوای ورودی S-شکل در اعداد ماخ مختلف. هشتمین کنفرانس بین‌الملی هوافضای ایران.

[20] بهفرشاد قاسم، محلو سعید، کدیور امین (1388) بررسی اثرات نصب صفحات گرداب‌ساز و دمش لایه‌مرزی بر کارایی یک مجرای ورودی هوای خم‌دار. هشتمین کنفرانس بین‌الملی هوافضای ایران.

[21] Liou MS (2001) Ten years in the making AUSM–family. Report/Patent Number: AIAA 2001–2521.

[22] صمدی واقفی نوید (1388) طراحی بهینه مجاری آیرودینامیکی به کمک طراحی معکوس. پایان‌نامه کارشناسی‌ارشد، دانشگاه صنعتی شریف.