Dynamic Pit Tracker: An Iterative Heuristic Algorithm Tracing Optimized Solution for Ultimate Pit Limit and Blocks Sequencing Problem | ||
| Journal of Mining and Environment | ||
| مقاله 12، دوره 15، شماره 4، دی 2024، صفحه 1373-1394 اصل مقاله (1.07 M) | ||
| نوع مقاله: Original Research Paper | ||
| شناسه دیجیتال (DOI): 10.22044/jme.2024.12944.2349 | ||
| نویسندگان | ||
| Meisam Saleki* 1؛ Reza Khaloo Kakaie2؛ Mohammad Ataei2؛ Ali Nouri Qarahasanlou3 | ||
| 1School of Materials and Minerals Resources Engineering, Universiti Sains Malaysia (USM), Malaysia | ||
| 2Faculty of Mining, Petroleum & Geophysics Eng., Shahrood University of Technology, Shahrood, Iran | ||
| 3Faculty of Science and Technology, UiT, The Arctic University of Norway, Tromsø, Norway | ||
| چکیده | ||
| One of the most critical designs in open-pit mining is the ultimate pit limit (UPL). The UPL is frequently computed initially through profit-maximizing algorithms like the Lerchs-Grossman (LG). Then, in order to optimize net present value (NPV), production planning is executed for the blocks that fall within the designated pit limit. This paper presents a mathematical model of the UPL with NPV maximization, enabling simultaneous determination of the UPL and long-term production planning. Model behavior is nonlinear. Thus, in order to achieve model linearization, the model has been partitioned into two linear sub-problems. The procedure facilitates the model solution and the strategy by decreasing the number of decision variables. Naturally, the model is NP-Hard. As a result, in order to address the issue, the Dynamic Pit Tracker (DPT) heuristic algorithm was devised, accepting economic block models as input. A comparison is made between the economic values and positional weights of blocks throughout the steps in order to identify the most appropriate block. The outcomes of the mathematical model, LG, and Latorre-Golosinski (LAGO) algorithms were assessed in relation to the DPT on a two-dimensional block model. Comparative analysis revealed that the UPLs generated by these algorithms are consistent in this instance. Utilizing the new algorithm to determine UPL for a 3D block model revealed that the final pit profit matched LG UPL by 97.95%. | ||
| کلیدواژهها | ||
| Open Pit Mines؛ Ultimate Pit Limit؛ Net Present Value؛ Integer Programming؛ Heurist Algorithm | ||
| مراجع | ||
|
[1]. Osanloo, M., Gholamnejad, J., & Karimi, B. (2008). Long-term open pit mine production planning: a review of models and algorithms. International Journal of Mining, Reclamation and Environment, 22(1), 3-35.
[2]. Whittle, J. (1989). The facts and fallacies of open pit optimization. Whittle Programming Pty Ltd., North Balwyn, Victoria, Australia, 1-7.
[3]. Pana, M. T. (1965, March). The simulation approach to open pit design. In APCOM SYMPOSIUM (Vol. 5, pp. 127-138).
[4]. Wright, A. (1999). MOVING CONE II-A simple algorithm for optimum pit limits design. Proceedings of the 28rd APCOM, 367-374.
[5]. David, M., Dowd, P. A., & Korobov, S. (1974, April). Forecasting departure from planning in open pit design and grade control. In 12th Symposium on the application of computers and operations research in the mineral industries (APCOM) (Vol. 2, pp. F131-F142).
[6]. Denby, B., & Schofield, D. (1994). Open-pit design and scheduling by use of genetic algorithms. Transactions of the Institution of Mining and Metallurgy. Section A. Mining Industry, 103.
[7]. Achireko, P. K., & Frimpong, S. (1996). Open pit optimization using artificial neural networks on conditionally simulated blocks. In Proceeding of 26th Int. APCOM Symposium (pp. 285-290).
[8]. Sayadi, A. R., Fathianpour, N., & Mousavi, A. A. (2011). Open pit optimization in 3D using a new artificial neural network. Archives of Mining Sciences, 56(3), 389-403.
[9]. Franco-Sepulveda, G., Del Rio-Cuervo, J. C., & Pachón-Hernández, M. A. (2019). State of the art about metaheuristics and artificial neural networks applied to open pit mining. Resources Policy, 60, 125-133.
[10]. Jodeiri, B., Dehghani, H., & Sadeghi, M. (2021). Ultimate pit limit determination using flashlight algorithm. International Journal of Mining and Geo-Engineering, 55(1), 43-48.
[11]. Turan, G., & Onur, A. H. (2023). Optimization of open-pit mine design and production planning with an improved floating cone algorithm. Optimization and Engineering, 24(2), 1157-1181.
[12]. Lerchs, H. (1965). Optimum design of open-pit mines. CIM bulletin, 58(633), 47-54.
[13] Liu, S. Q., & Kozan, E. (2016). New graph-based algorithms to efficiently solve large scale open pit mining optimisation problems. Expert Systems with Applications, 43, 59-65.
[14]. Esmaeil, R., Ehsan, M., Reza, S., & Mehran, G. (2018). Optimized algorithm in mine production planning, mined material destination, and ultimate pit limit. Journal of Central South University, 25(6), 1475-1488.
[15]. Caccetta, L., & Hill, S. P. (2003). An application of branch and cut to open pit mine scheduling. Journal of global optimization, 27(2-3), 349-365.
[16]. Saleki, M., Kakaie, R., & Ataei, M. (2019). Mathematical relationship between ultimate pit limits generated by discounted and undiscounted block value maximization in open pit mining. Journal of Sustainable Mining, 18(2), 94-99.
[17]. Roman, R. J. (1974). The role of time value of money in determining an open pit mining sequence and pit limits. In Proc. 12th Symp. Application Computers and Operation Research in the Mineral Industry.
[18]. Gershon, M. (1987). Heuristic approaches for mine planning and production scheduling. International Journal of Mining and Geological Engineering, 5(1), 1-13.
[19]. Wang, Q., & Sevim, H. (1992). Enhanced production planning in open pit mining through intelligent dynamic search. Institute of Mining Metallurgy (ed), 23, 461-471.
[20]. Wang Q., & Sevim H. (1993). Open pit production planning through pit-generation and pit-sequencing. Transactions, SME, Vol. 294, pp. 1968-1972.
[21]. Wang Q., & Sevim H. (1995). Alternativ to Parametrization in Finding a Series of Maximum-Metal Pits for Production Planning. Mining Engineering Journal, pp 178-182.
[22]. Askari-Nasab, H., & Awuah-Offei, K. (2009). Open pit optimisation using discounted economic block values. Mining Technology, 118(1), 1-12.
[23]. Latorre, E., & Golosinski, T. S. (2011). Definition of economic limits taking into consideration time value of money. Canadian Institute of Mining, Metallurgy and Petroleum (CIM) Journal, 2(3), 162-170.
[24]. Saleki, M., Khalo Kakaei, R., & Ataei, M. (2020). A non-monetary valuation system for open-pit mine design. International Journal of Mining and Geo-Engineering, 54(2), 135-145.
[25]. Dimitrakopoulos, R. (2011). Stochastic optimization for strategic mine planning: A decade of developments. Journal of Mining Science, 47(2).
[26]. Benndorf, J., & Dimitrakopoulos, R. (2013). Stochastic long-term production scheduling of iron ore deposits: Integrating joint multi-element geological uncertainty. Journal of Mining Science, 49(1), 68-81.
[27]. Chatterjee, S., Sethi, M. R., & Asad, M. W. A. (2016). Production phase and ultimate pit limit design under commodity price uncertainty. European Journal of Operational Research, 248(2), 658-667.
[28]. Lamghari, A., & Dimitrakopoulos, R. (2016). Network-flow based algorithms for scheduling production in multi-processor open-pit mines accounting for metal uncertainty. European Journal of Operational Research, 250(1), 273-290.
[29]. Gilani, S. O., & Sattarvand, J. (2016). Integrating geological uncertainty in long-term open pit mine production planning by ant colony optimization. Computers & Geosciences, 87, 31-40.
[30]. Richmond, A. (2018). Direct net present value open pit optimisation with probabilistic models. Advances in applied strategic mine planning, 217-228.
[31]. Upadhyay, S. P., & Askari-Nasab, H. (2018). Simulation and optimization approach for uncertainty-based short-term planning in open pit mines. International Journal of Mining Science and Technology, 28(2), 153-166.
[32]. Paithankar, A., & Chatterjee, S. (2019). Open pit mine production schedule optimization using a hybrid of maximum-flow and genetic algorithms. Applied Soft Computing, 81, 105507.
[33]. Rimélé, A., Dimitrakopoulos, R., & Gamache, M. (2020). A dynamic stochastic programming approach for open-pit mine planning with geological and commodity price uncertainty. Resources Policy, 65, 101570.
[34]. Gilani, S. O., Sattarvand, J., Hajihassani, M., & Abdullah, S. S. (2020). A stochastic particle swarm based model for long term production planning of open pit mines considering the geological uncertainty. Resources Policy, 68, 101738.
[35]. Acorn, T., Boisvert, J. B., & Leuangthong, O. (2020). Managing geologic uncertainty in pit shell optimization using a heuristic algorithm and stochastic dominance. Mining, Metallurgy & Exploration, 37(2), 375-386.
[36]. Lagos, T., Armstrong, M., Homem-de-Mello, T., Lagos, G., & Sauré, D. (2020). A framework for adaptive open-pit mining planning under geological uncertainty. Optimization and Engineering, 1-36.
[37]. Armstrong, M., Lagos, T., Emery, X., Homem-de-Mello, T., Lagos, G., & Sauré, D. (2021). Adaptive open-pit mining planning under geological uncertainty. Resources Policy, 72, 102086.
[38]. Danish, A. A. K., Khan, A., & Muhammad, K. (2023). A simulated annealing based stochastic long-term production scheduling of open-pit mines with stockpiling under grade uncertainty. International Journal of Mining, Reclamation and Environment, 37(1), 43-65. | ||
|
آمار تعداد مشاهده مقاله: 507 تعداد دریافت فایل اصل مقاله: 112 |
||