[1]. Gonzalez, J., Saldana, M., Arzua, J. (2019). Analytical Model for Predicting the UCS from P-Wave Velocity, Density, and Porosity on Saturated Limestone. Applied Sciences, 9(23), 5265.

[2]. Yagiz, S. (2008). Utilizing rock mass properties for predicting TBM performance in hard rock conditions. Tunneling and Underground Space Technology, 23, 326–339.

[3]. Yagiz, S. (2009). Assessment of brittleness using rock strength and density with punch penetration test. Tunneling and Underground Space Technology, 24(1), 66-74.

[4]. Kim, T., Hwang, S., Jang, S. (2017). Petrophysical approach for S-wave velocity prediction based on brittleness index and total organic carbon of shale gas reservoir: A case study from Horn River Basin, Canada Journal of Applied Geophysics, 136, 513–520.

[5]. Meng, F., Wong, L., Zhou, H. (2021). Rock brittleness indices and their applications to different fields of rock engineering: A review. Journal of Rock Mechanics and Geotechnical Engineering, 13, 221–247.

[6]. Zhang, X. P., & Wong, L. (2011). Cracking processes in rock-like material containing a single flaw under uniaxial compression: A numerical study based on parallel bonded-particle model approach. Rock Mechanics and Rock Engineering, 45(5), 711–737.

[7]. Wu, Z., Fan, L., Liu, Q., & Ma, G. (2016). Micro-mechanical modeling of the macro-mechanical response and fracture behavior of rock using the numerical manifold method. Engineering Geology, 225. 49- 60.

[8]. Yang, Y., Tang, X., Zheng, H., Liu, Q., & He, L. (2016). Three-dimensional fracture propagation with numerical manifold method. Engineering Analysis with Boundary Elements, 72, 65–77.

[9]. Zhang, S., Li, Y., Shen, B., Sun, X., & Gao, L. (2019). Effective evaluation of pressure relief drilling for reducing rock bursts and its application in underground coal mines. International Journal of Rock Mechanics and Mining Sciences, 114(11), 7–16.

[10]. Zhou, S., Zhuang, X., & Rabczuk, T. (2019). Phase field modeling of brittle compressive-shear fractures in rock-like materials: A new driving force and a hybrid formulation. Computer Methods in Applied Mechanics and Engineering, 355(1), 729–752.

[11]. Chen, S., Zhang, J., Yin, D., Cheng, X., & Ning, J. (2021). Relative permeability measurement of coal microchannels using advanced microchip technology. Fuel, 312, 122633.

[12]. Davarpanah, M., Somodi, G., Kova´cs, L., Va´sa´rhelyi, B. (2020). Experimental Determination of the Mechanical Properties and Deformation Constants of Mo´ra´gy Granitic Roc Formation (Hungary).  Geotechnical and Geological Engineering, 38(3), 3215–3229.

[13]. Wang, Sh., Wang, Li., Ren, B., Ding, K. (2024). Mechanical behavior and fracture characteristics of high-temperature sandstone under true triaxial loading conditions. Journal of Materials Research and Technology, 28, 569–581.

[14]. Jiang, N., Lv, K., Gao, Z., Jia, C., Ye, L., Meng, S., Su, Q. (2023). Experimental study on mechanical properties of single fracture-hole red sandstone. Frontiers in Earth Science, 10:1083689.

[15]. Safari Farrokhad, S., Lashkaripour, G.R., Hafezi Moghaddas, N., Aligholi, S. (2022). The Effect of the Petrography, Mineralogy, and Physical Properties of Limestone on Mode I Fracture Toughness under Dry and Saturated Conditions. Applied Sciences, 12(18), 9237.

[16]. Liu, W., Zhu, X., & Jing, J. (2018). The analysis of ductile-brittle failure mode transition in rock cutting. Journal of Petroleum Science and Engineering, 163, 311–319.

[17]. Aharonov, E., & Scholz, C. (2019). The brittle-ductile transition predicted by a physics-based friction law. Journal of Geophysical Research: Solid Earth, 124(3), 2721–2737.

[18]. Zhao, J., Feng, X., Zhang, X., & Yang, C. (2019). Brittle and ductile creep behavior of Jinping marble under true triaxial stress. Engineering geology, 258, 105157.

[19]. Liu, S., Chen, H., Yuan, S., & Zhu, Q. (2020). Experimental investigation and micromechanical modeling of the brittle-ductile transition behaviors in low-porosity. International Journal of Rock Mechanics and Mining Sciences, 179, 105654.

[20]. You, T., Waisman, H., & Zhu, Q. (2021). Brittle-ductile failure transition in geomaterials modeled by a modified phase-field method with a varying damage-driving energy coefficient. International Journal of Plasticity, 136, 102836.

[21]. Jacquey, A., & Cacace, M. (2020). Multiphysics modeling of a brittle-ductile lithosphere: 2. Semi-brittle, semi-ductile deformation and damage rheology. Journal of Geophysical Research: Solid Earth, 125(1).

[22]. Su, C., Qiu, J., Wu, Q., & Weng, L. (2020). Effects of high temperature on the microstructure and mechanical behavior of hard coal. International Journal of Mining Science and Technology, 30(5), 643–650.

[23]. Kim, B., & Larson, M. (2021). Laboratory investigation of the anisotropic confinement-dependent brittle-ductile transition of a Utahcoal. International Journal of Mining Science and Technology, 31(1), 51–57.

[24]. Cai, M. (2013). Principles of rock support in burst-prone ground. Tunnelling and Underground Space Technology, 36(6), 46–56.

[25]. Eberhardt, E., Lavoie, T., Rahjoo, M. (2020) The importance of geometric dilation in response to brittle rock failure for support design in high stress environments. In: Rock mechanics for natural resources and infrastructure development—proceedings of the 14th international congress on rock mechanics and rock engineering, 2509–2516.

[26]. Li, H., Qi, Q., Du, W., Li, X. (2022). A criterion of rockburst in coal mines considering the influence of working face mining velocity. Geomechanics and Geophysics for Geo-Energy and Geo-Resources, 8(1).

[27]. Pan, Y., Wang, J., Zhang, J., Song, Y., Xiao, Y., & Wang, H. (2022). Development and application of a hydraulic impact test machine for simulating rockburst conditions. Geomechanics and Geophysics for Geo-Energy and Geo-Resources, 8, 105.

[28]. Zhao, Y., Wang, X., Guo, Y., Danesh, N., & Jiang, Y. (2022a). Mechanical properties and brittleness characteristics of sandstone from different burial depths. Geomechanics and Geophysics for Geo-Energy and Geo-Resources, 8, 165.

[29]. Zhao, J., Jiang, Q., Lu, J., Chen, B., Pei, S., & Wang, Z. (2022b). Rock fracturing observation based on microseismic monitoring and borehole imaging: in situ investigation in a large underground cavern under high geo-stress. Tunnelling and Underground Space Technology, 126(1).

[30]. Zhao, J., Jiang, Q., Pei, S., Chen, B., Xu, D, & Song, L. (2023). Microseismicity and focal mechanism of blasting-induced block falling of intersecting chamber of large underground cavern under high geostress. Journal of Central South University, 30, 542-554.

[31]. Ulloa, J., Rodrı ´guez, P., Samaniego, C., & Samaniego, E. (2019). Phasefield modeling of fracture for quasi-brittle materials. Underground Space, 4(1), 10–21.

[32]. Xia, Z., Jiang, N., Yang, H., Han, L., Pan, H., Zhao, Z., & Feng, Q. (2020). Effect of multiple hole distribution and shape based on particle flow on rocklike failure characteristics and mechanical behavior. Advances in Civil Engineering, (6), 1–13.

[33]. AE, D., Gokay, M. (2016). Cuttability assessment of selected rocks through different brittleness values. Rock Mechanics and Rock Engineering, 49,1173–1190.

[34]. Liu, Q., Liu, J., Shi, K., Pan, Y., Huang, X., Liu, X., & Wei, L. (2016). Evaluation of rock brittleness indexes on rock fragmentation efficiency by disc cutter. Chinese Journal of Rock Mechanics and Engineering, 35(3):498-510 (in Chinese).

[35]. Haeri, H., Shahriar, K., Fatehi Marji, M., & Moarefvand, P. (2014). On the Strength ‎and Crack Propagation Process of the Pre-Cracked Rock-Like Specimens Under Uniaxial ‎Compression. Strength of Materials,46(1).

[36]. Haeri, H., (2015). Simulating the Crack Propagation Mechanism of Pre-Cracked Concrete ‎Specimens Under Shear Loading Conditions. Strength of Materials 47, 618–632.‎

[37]. Haeri, H., (2015). Propagation mechanism of neighboring cracks in rock-like cylindrical specimens ‎under uniaxial compression. Geomechanics. Volume 51.

[38]. Haeri, H., Sarfarazi, V. (2016). The deformable multilaminate for predicting the Elasto-Plastic behavior of rocks. Computers and Concrete, 18(2), 201-214

[39]. Tian, Z., Tang, C., Yu, C., Liu, Y., Chen, S., & Jin, Y. (2022). Numerical Simulation Analysis of Mechanical Properties on Rock Brittle–Ductility Transformation Under Different Loading Rates. Frontiers in Earth Science, 10:825229.

[40]. Liang, Z., Song, W. (2021). Theoretical and Numerical Investigations of the Failure Characteristics of a Faulted Coal Mine Floor above a Confined Aquifer. International Journal of Mine Water, 40 (2), 456–465.

[41]. Tang, S., Wang, J., & Tang, C. (2020). Identification of Microseismic Events in Rock Engineering by a Convolutional Neural Network Combined with an Attention Mechanism. Rock Mechanics and Rock Engineering, 54(1), 47–69.

[42]. Tian, Z., Tang, C., Liu, Y., & Tang, Y. (2020). Zonal Disintegration Test of Deep Tunnel under Plane Strain Conditions. International Journal of Coal Science & Technology, 7(2), 337–349.

[43]. Jiang, X., Ma, T., Okubo, S., Peng, S., Tang, Y., Chen, C., Wang, Z. (2017). Experimental Study of Generalized Stress Relaxation Characteristics of Rock under Different Confining Pressures. Yantu Lixue/Rock and Soil Mechanics, 38, 57–66.

[44]. Kang, Y., Jia, Y., Luo, Y., & Chen, J. (2017). Research on the Theoretical and Experimental Value of Azimuth Angle of the Fracture Surface for the Rock Subjected to Triaxial Compression. Sec. Solid Earth Geophysics, 49(05), 665–670.

[45]. Wang, S., Xu, W., Wang, W., Wang, R., & Xiang, Z. (2017). The Statistical Damage Constitutive Model of Rocks and its Experiment. Journal of Hohai University, 45(05), 464–470.

[46]. Zheng, Z., Zheng, H., Zhao, J., Liu, Z., Feng, G., & Qiu, Sh. (2023). Ductile–brittle quantitative evaluation of rock based on post‑peak properties under true triaxial stress   Geomech. Geomechanics and Geophysics for Geo-Energy and Geo-Resources, 9(1).

[47]. Wong, T., Baud, P. (2012). The brittle-ductile transition in porous rock: A review. Journal of Structural Geology, 44(52), 25–53.

[48]. Schopfer, M., Childs, C., & Manzocchi, T. (2013) Three-dimensional failure envelopes and the brittle-ductile transition. Journal of Geophysical Research: Solid Earth, 118(4), 1378–1392.  

[49]. Lyakhovsky, V., Zhu, W., & Shalev, E. (2015). Visco-poroelastic damage model for brittle-ductile failure of porous rocks. Journal of Geophysical Research: Solid Earth, 120(4), 2179–2199.

[50]. Liu, W., Zhu, X., & Jing, J. (2018). The analysis of ductile-brittle failure mode transition in rock cutting. Journal of Petroleum Science and Engineering, 163, 311–319.

[51]. Aharonov, E., Scholz, C. (2019). The brittle-ductile transition predicted by a physics-based friction law. Journal of Geophysical Research: Solid Earth, 124(3), 2721–2737.

[52]. Zhao, J., Feng, X., Zhang, X., & Yang, C. (2019). Brittle and ductile creep behavior of Jinping marble under true triaxial stress. Engineering Geology, 258, 105157.

[53]. Liu, S., Chen, H., Yuan, S., & Zhu, Q. (2020). Experimental investigation and micromechanical modeling of the brittle-ductile transition behaviors in low-porosity. International Journal of Mechanical Sciences, 179, 105654.

[54]. Davarpanah, M., Somodi, G., & Vásárhelyi, B. (2020). Experimental determination of the mechanical properties and deformation constants of Mórágy granitic rock formation (Hungary). Geotechnical and Geological Engineering, 38(3), 3215–3229.

[55]. You, T., Waisman, H., & Zhu, Q. (2021).  Brittle-ductile failure transition in geomaterials modeled by a modified phase-field method with a varying damage-driving energy coefficient. International Journal of Plasticity, 136, 102836.

[56]. Jacquey, A., Cacace, M. (2020). Multiphysics modeling of a brittle-ductile lithosphere: 2. Semi-brittle, semi-ductile deformation and damage rheology. Journal of Geophysical Research: Solid Earth,125(1).

[57]. Su, C., Qiu, J., Wu, Q., & Weng, L. (2020). Effects of high temperature on the microstructure and mechanical behavior of hard coal. International Journal of Mining Science and Technology, 30(5), 643–650.

[58]. Kim, B., Larson, M. (2021). Laboratory investigation of the anisotropic confinement-dependent brittle-ductile transition of a Utah coal. International Journal of Mining Science and Technology, 31(1), 51–57.

[59]. Yaylacı, M.,  Abanoz, M., Yaylacı, E., Ölmez, H., Sekban, D., Birinci, A. (2022) Evaluation of the contact problem of functionally graded layer resting on rigid foundation pressed via rigid punch by analytical and numerical (FEM and MLP) methods. Archive of Applied Mechanics, 92, 1953–1971.

[60]. Yaylaci, M.,  Yaylacı, E., Özdemir, M., & Ay, S. (2022) Implementation of finite element and artificial neural network methods to analyze the contact problem of a functionally graded layer containing crack. Steel and Composite Structures, 45(4), 501-511.

[61]. Yaylaci, M.,   Yaylacı, E., Özdemir, M., Özturk, S., & Sesli, H. (2023) Vibration and buckling analyses of FGM beam with edge crack: Finite element and multilayer perceptron methods. Steel and Composite Structures, 46(4), 565-575.

[62]. Stöcklin, J. (1968). Structural history and tectonics of Iran: a review. Am Assoc Pet Geol Bull 52:1229–1258.

[63]. Shahbazi, H., Siebel, W., Pourmoafee, M., Ghorban,i M., Sepahi, A., Shang, CK., & Vousoughi Abedini, M. (2010). Geochemistry and U–Pb zircon geochronology of the Alvand plutonic complex in Sanandaj–Sirjan Zone (Iran): new evidence for Jurassic magmatism. Journal of Asian Earth Sciences,39, 668–683.

[64]. Valizadeh, M., Cantagrel, J. (1975). Premières données radiométriques (K–Ar et Rb–Sr) sur les micas du complexes magmatique du Mont Alvand, Pres Hamadan (Iran occidental). Comptes Rendus de l’Academie des Sciences, Paris 281, 1083–6.

[65]. Eshraghi, S., Mohammadi Gharai, M. (2003). Geological Map of Tuyserkan 1/100000, Geological Survey and Mineral exploration of Iran, Tehran.

[66]. Baharifar, A., Moinevaziri, H., Bellon, H., & Piqué, A. (2004). The crystal-line complexes of Hamadan (Sanandaj–Sirjan zone, western Iran): metasedimentary Mesozoic sequences affected by Late Cretaceous tectono-metamorphic and plutonic events. Comptes Rendus Geoscience, 336,1443–1452.

[67]. Sepahi, A., Whitney, D., & Baharifar, A. (2004). Petrogenesis of anda-lusite–kyanite–sillimanite veins and host rocks, Sanandaj–Sirjan metamorphic belt, Hamadan. Journal of Metamorphic Geology, 22,119–134.

[68]. Stocklin, J., Setudenia, A. (1972). Lexique stratigraphique international, vol.III. Paris: Centre National de la Recherche Scientifique, 75 pp.

[69]. Sepahi, A., Salami, S., Lentz, D., McFarlane, C., Maanijou, M. (2018). Petrography, geochemistry, and U–Pb geochronology of pegmatites and aplites associated with the Alvand intrusive complex in the Hamedan region, Sanandaj–Sirjan zone, Zagros orogen (Iran). International Journal of Earth Sciences, 107, 1059–1096.

[70]. Undul, O. (2016). Assessment of mineralogical and petrographic factors affecting petro-physical properties, strength and cracking processes of volcanic rocks. Engineering Geology, 210(2).

[71]. Ozturk, C., Nasuf, E. (2013). Strength classification of rock material based on textural properties. Tunnelling and Underground Space Technology, 37,45–54. 

[72]. Tandon, R., Gupta, V. (2013). The control of mineral constituents and textural characteristics on the petrophysical & mechanical (PM) properties of different rocks of the Himalaya. Engineering Geology,153, 125–143.

[73]. Ündül, O. (2016). Assessment of mineralogical and petrographic factors affecting petrophysical properties, strength and cracking processes of volcanic rocks. Engineering Geology, 210,10–22.

[74]. Howarth, D., Rowlands, J. (1987). Quantitative assessment of rock texture and correlation with drillability and strength properties. Rock Mechanics and Rock Engineering, 20, 57–85.

[75]. Ozturk, C. (2004) The assessment of rock cutability, and physical and mechanical rock properties from a texture coefficient. Journal of the Southern African Institute of Mining and Metallurgy, 104(7), 397–403.

[76]. Alber, M., Kahraman, S. (2009). Predicting the uniaxial compressive strength and elastic modulus of a fault breccia from texture coefficient. Rock Mechanics and Rock Engineering, 42,117–127.

[77]. Singh, T., Verma, A.  (2012). Comparative analysis of intelligent algorithms to correlate strength and petrographic properties of some schistose rocks. Engineering with Computers, 28,1–12.

[78]. Ozturk, C., Nasuf, E., & Kahraman, S. (2014). Estimation of rock strength from quantitative assessment of rock texture. Journal of the Southern African Institute of Mining and Metallurgy, 114(6), 471-480.

[79]. Roduit, N. (2009). JMicroVision: image analysis toolbox for measuring and quantifying components of high-definition images. Version 1.2.7. Software available for free download at http:// www.jmicrovision.com.

[80]. Dreyer, W. (1973) The Science of Rock Mechanics. Part I. The Strength Properties of Rocks. Series on Rock and Soil Mechanics, Trans Tech Publications, Clausthal.

[81]. Aligholi, S. Lashkaripour, G., & Ghafoori, M. (2018). Estimating engineering properties of igneous rocks using semi-automatic petrographic analysis. Bulletin of Engineering Geology and the Environment, 78. 2299-2314.

[82]. Peng, J. Wong, N., & Teh, C. (2017). Influence of grain size heterogeneity on strength and micro-cracking behavior of crystalline rocks. Journal of Geophysical Research: Solid Earth, 122, 1054-1073.

[83]. Mogi, K. (1966). Pressure dependence of rock strength and transition from brittle fracture to ductile flow. Bulletin of the Earthquake Research Institute, 44, 215-232.

[84]. Hucka, V., Das, B. (1974). Brittleness determination of rocks by different methods. International Journal of Rock Mechanics and Mining Sciences & Geomechanics Abstracts, 11, 389–392.

[85]. Singh, S. (1985). Brittleness and the mechanical winning of coal. Mining Science and Technology, 3, 173–180.

[86]. Heidari, M., Khanlari, G., Torabi Kaveh, M., Kargarian, S., & Saneie, S. (2014). Effect of porosity on rock brittleness. Rock Mechanics and Rock Engineering, 47, 785–790.

[87]. Mohammadi, S., Torabi Kaveh, M., & Bayati, M. (2015). Prediction of TBM penetration rate using intact and mass rock properties (case study, Zagros long tunnel, Iran). Arabian Journal of Geosciences, 8(6), 3893-3904.